Wheelchair Safety

Wheelchair Safety (14)

Friday, 20 July 2012 19:40

Flagship

Written by

 

Flagship Systems

This range consists of six options for rail fixings
and one for Solo anchor. All systems can secure a
wheelchair weight of up to 120kg

 

 

4 Point Wheelchair tie-down with Tongue and Buckle

  • 4-Point Wheelchair Tie-Down
  • Pair of Static front straps with Tongue and Buckle
  • Pair of Rear tie-down straps with Tongue and Buckle
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.
  • Product code: SYS01

 

4 Point Wheelchair tie-down with Karabiner

  • Pair of Static front straps with Tongue and Buckle
  • Pair of Rear tie-down straps with Karabiner
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.
  • Product code: SYS02

 

4 Point Wheelchair tie-down with a
seperate Occupant Restraint

  • Pair of Static front straps with Tongue and Buckle
  • Pair of Rear tie-down straps with Karabiner
  • Separate 3-point Occupant Restraint with a
  • removable upper anchorage strap
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.
  • Product code: SYS03

 

Combined Wheelchair tie-down and
Occupant Restraint

  • Pair of Static front straps with Tongue and Buckle
  • Pair of Rear tie-down straps with Karabiner combined
  • with 3-point Occupant Restraint with a
  • removable upper anchorage strap
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.
  • Product code: SYS04

 

Static Front Straps with Quattro tie-down and a
separate Occupant Restraint

  • Pair of Static front straps with Tongue and Buckle
  • Pair of Quattro retractable restraints with Karabiner
  • Separate 3-point Occupant Restraint with a
  • removable upper anchorage strap
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.
  • Product code: SYS05

 

Two pairs of Quattro tie-downs with a
seperate Occupant Restraint

  • Pair of Quattro retractable restraints for use at front
  • Pair of Quattro retractable restraints for use at rear
  • Seperate 3-point Occupant Restraint with a
  • removeable upper anchorage strap
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.
  • Product code: SYS06

 

Solo static front straps with a Combined Quattro Solo
tie-down and Occupant Restraint system

 

  • Pair of Solo static front straps with Tongue and Buckle
  • Pair of Quattro Solo retractable tie-down with Karabiner
  • Combined with a 3-point Occupant Restraint with a
  • removeable upper anchorage strap
  • Suitable for wheelchairs weights up to 120kg.
  • Successfully tested to ISO 10542.

 

  • Product code: SYS20

 

 

 

 

Friday, 20 July 2012 19:39

Mix and Match

Written by

 

At Promobility we can offer a 'Mix and Match' range of systems and products, allowing you to tailor your wheelchair restraint to suit your requirements.

 

 

 

Red Front Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   OF01   pairStatic Length with Tongue and Buckle
  • Product code:   OF02   pair - Static Length with Karabiner
  • Product code:   OF03   pair - Adjustable Length with Tongue and Buckle

 

 

 

 

 

 

Black Front Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   OF09   pair - Static Length with Karabiner
  • Product code:   OF08   pair - Adjustable Length with Karabiner

 

 

 

 

 

 

Electric Reel Front Straps

  • Suitable for wheelchairs weights up to 100kg
  • Product code:   SLR102   pair - 4m Length, Tongue and Buckle - with Covers
  • Product code:   SLR103   pair - 4m Length, Tongue and Buckle - without Covers
  • Product code:   SLR115   pair - 4m Length, Karabiner - with Covers
  • Product code:   SLR120   pair - 4m Length, Karabiner - without Covers

 

 

 

 

 

 

 

Quattro Retractor Front or Rear Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   FR01   pair - Quattro Retractor, Tongue and Buckle with Plastic Covers
  • Product code:   FR02   pair - Quattro Retractor, Karabiner with Plastic Covers
  • Product code:   FR03   pair - Quattro Retractor, Tongue and Buckle with Metal Covers
  • Product code:   FR04   pair - Quattro Retractor, Karabiner with Matal Covers
  • Product code:   FR05   pair - Quattro Express, Self Tensioning Retractor, Karabiner with Metal Covers

 

 

 

 

 

 

 

 

 

Rear Tie-Down Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   OR01   pair - Adjustable Tie-down with Tongue and Buckle
  • Product code:   OR02   pair - Adjustable Tie-down with Karabiner

 

 

 

 

 

 

 

 

 

Rear Combined Tie-Down Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   OR09  pair - Webbing Tie-down, Tongue and Buckle, Combined Passenger Seat Belt
  • Product code:   OR10 pair - Webbing Tie-down, Karabiner, Combined Passenger Seat Belt
  • Product code:   OR13  pair - Quattro Tie-down, Plastic Covers,  Karabiner, Combined Passenger Seat Belt
  • Product code:   OR14  pair - Quattro Tie-down, Metal Covers,  Karabiner, Combined Passenger Seat Belt
  • Product code:   OR15  pair - Quattro Express Self Tensioning Tie-down, Metal Covers,  Karabiner, Combined Passenger Seat Belt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3rd Point Upper Strap

  • Use to enable Passenger Restraint Complies with ISO-10542 Recommendations
  • Product code:   3-PTR   Removable Track Fitting 3rd Point Adaptor Belt
  • Product code:   3-PTF   Fixed 3rd Point Adaptor Belt

 

 

 

 

 

 

 

Extension Strap for Double Inertia

  • Product codes:
  • ES300 (300mm extension)
  • ES500 (500mm extension)

 

 

 

 

 

 

D-Rings

  • Suitable for wheelchair weights of up to 120kg
  • Product code: DR120 - pair D-Rings

 

 

 

 

 

 

Headrest

  • Designed to provide support for the wheelchair user
  • Product code:
  • HRS - Standard Headrest
  • HRC - Child Hreadrest
  • HRL - Long Stalk Headrest

 

 

 

Friday, 20 July 2012 19:38

Titan 200kg

Written by

 

Titan

Unwin Titan range is capable of restraining
transportable wheelchairs up to 200kg.

Titan Front Straps

  • Suitable for wheelchair weights up to 200kg
  • Product code:   OF08 - pair Adjustable Front Straps, with Karabiner
  • Product code:   OF09 - pair Static Front Straps, with Karabiner

 

 

 

 

 

 

 

Titan Rear Straps

  • Suitable for wheelchair weights up to 200kg
  • Product code:   OR03 - 2 x pair Black Webbing Titan Tie-Down with Karabiner
  • Product code:   OR04 - pair Black Webbing Titan Tie-Down with Snap-Lock (Titan 2)
  • Product code:   OR05 - pair Black Webbing Titan Tie-Down with Snap-Lock (Titan 3)
  • Product code:   OR06 - pair Black Webbing Titan Tie-Down with Snap-Lock (Titan 4)
  • Product code:   OR07 - pair Black Webbing Titan Tie-Down with Snap-Lock (Titan 5)
  • Product code:   OR08 - pair Black Webbing Titan Tie-Down with Snap-Lock (Titan 6)

 

 

 

 

 

 

 

Users of Titan tie-down systems must
refer to the wheelchair manufacturers
'Instruction for the Use in Transport'
for details of tie-down attachment points
on the wheelchair, and any other specific
instructions relating to use in transport.

 

Friday, 20 July 2012 19:37

Solo Systems

Written by

 

Solo Systems

Solo systems provide a dedicated position within the 
vehicle for wheelchair securing.  
Using the Solo Floor Anchor, which is bolted
permanently to the vehicle floor, you simply slide
the Solo wheelchair restraints onto the anchors.
Available in our 'Flagship' range or as 'Mix and Match'.
You can choose between wheelchair restraint only or
full wheelchair and occupant restraint systems.

 

Flagship System - Solo

  • Quattro Solo retractable tie-downs, with Karabiner,
  • Combined with a 3-Point Double Inertia, with,
  • Removeable upper anchorage point.
  • Successfully tested to ISO 10542.
  • Suitable for wheelchairs weights up to 120kg.
  • System requires 4 Solo Anchors, ordered separately.
  • Product code:   SYS20

 

 

 

 

 

 

 

Solo Front Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   OFS01 - pair Solo Static Front Straps, with Tongue and Buckle
  • Product code:   FRS01 - pair Solo Quattro Retractor Front or Rear Straps, Karabiner, with Metal Covers

 

 

 

 

 

 

 

Solo Rear Straps

  • Suitable for wheelchairs weights up to 120kg
  • Product code:   ORS02 - pair Solo Webbing Tie-down, Karabiner, with Combined Passenger Seat Belt
  • Product code:   ORS03 - pair Solo Quattro Retractor, Karabiner, with Combined Passenger Seat Belt
  • Product code:   ORS04 - pair Solo Quattro Expess Self Tensioning Retractor, Karabiner, with Combined Passenger Seat Belt

 

 

 

 

 

 

 

Solo Anchor

Solo floor Anchor for dedicated wheelchair positions,
allowing all Solo restraints to be easily fitted
or removed when required.

Product codes:

  • SA          -   Standard Floor Anchor - Spring Loaded with threaded length: 50mm.
  • SAS        -   Short Floor Anchor - Spring Loaded with threaded length: 90mm.
  • HVSA     -   High-Vis Floor Anchor - Spring Loaded with threaded length: 50mm.
  • HVLSA   -   High-Vis Floor Anchor - Spring Loaded with threaded length: 90mm.
  • S10       -   Static Floor Anchor

Friday, 20 July 2012 19:36

Dock-N-Lock

Written by

 

The new self docking system to secure individual powered wheelchairs in a vehicle.
Dock N Lock is the first wheelchair specific docking solution for powerchairs of up to 200kg.

  • Dock N Lock has been successfully tested to sustain wheelchair weight of up to 200kg and exceed ISO 10542 and SAEJ 2249 standards.
  • An innovative system for customers wanting the freedom to secure their powerchair using a single docking point and drive their vehicle from their wheelchair.
  • Dual locking mechanism provides easy docking from any angle and maximum protection.
  • Visual and audible warning indicator allows quick wheelchair release.
  • Low profile wheelchair bracket enable maximum ground clearance to prevent snagging on uneven surfaces.
  • Specific Adaptor Brackets are available for a variety of wheelchairs (please enquire)
  • Dock N Lock comes with a three year warranty.
  • Product Code: DNL - Dock 'N' Lock kit with bracket

 

Friday, 20 July 2012 19:36

Accessories

Written by

 

Accessories

 

 

 

 

Extension Straps

Extends the Double Inertia webbing where needed.

  • Product codes:
  • ES300 (300mm extension strap)
  • ES500 (500mm extension strap)

 

 

 

3rd Point Upper Anchorage Straps

Upper anchorage straps provide a 3rd point fixing above
the occupants shoulder to provide greater
safety in the event of an incident,
complies with ISO 10542 recommendations.

  • Product codes:
  • 3PTF Bolted 3rd Point Upper Anchorage Strap
  • 3PTR Removeable 3rd Point Upper Anchorage Strap

 

 

D-Rings

A simple accessory which allows webbing restraints
to be secured into place and operated in a normal manner
With wheelchair frame design becoming increasingly
complex, it is sometimes difficult to secure the restraint
on the wheelchair frame.
D-Rings can overcome this problem and can be used
on wheelchairs of up to 120kg.
Successfully tested to exceed ISO 10542

  • Product code: DR120

 

 

Wheelchair Headrest

The headrest is designed to provide head support
for wheelchair users. If used during transport, a headrest
can considerably reduce the risk of whiplash in case of an
accident. Easily mounted on the wheelchair handles
(maximum diameter 25mm).
It is fully adjustable for height, width and angle. 
The headrest is covered with washable PVC,
and comes in three different stalk lengths,
Standard Adult, Tall Adult and Children.

  • Product Codes:
  • HRC - Child Headrest
  • HRS - Standard headrest
  • HRL - Long Headrest

Red Strap

Designed to hold empty folded wheelchairs or other
unsecured items during transport.
Fitted with a pull tight buckle,
the wheelchair strap is easy to fasten.

  • Product Code:   RS

 

Saturday, 14 July 2012 14:34

Double Inertia

Written by

Double Inertia Occupant Restraint

This passenger restraint forms a separate lap belt and shoulder belt thanks to the split webbing reel. The Double Inertia Split Reel is now produced with red and black webbings. The red webbing is used as the shoulder belt whilst the black webbing is used as the lap belt, enabling drivers and carers to quickly ascertain whether their passengers are safely secured for transport.The passenger restraint comprises of a reversible stalk that can rotate to fit either side of the vehicle and a black housing reel.

A sliding Comfort clip prevents the webbing belts from becoming too tight thus offering a more comfortable fit for the passenger.
When using the 3 Point system, an additional third point fixing is required. This passenger restraint is normally chosen for wheelchair occupants with good upper body control.

Unwin recommends the use of a 3 point occupant restraint system to provide greater protection in case of an impact. However we also recognise that some vehicle layout/designs or specific postural or medical
conditions do not allow that style of seatbelts to be used easily. This system is not ISO 10542 compliant if used in 2 point configuration.

 

  • Split Reel Double Inertia Passenger Restraint
  • 2 point occupant restraint
  • Product code: OCR01
 

 

 

 

 

3rd Point Upper Anchorage Straps

Upper anchorage straps provide a 3rd point fixing
above the occupants shoulder to provide greater
safety in the event of an incident, to comply
with ISO 10542 reccommendations.

 

  • Product codes:
  • 3PTF Bolted 3rd Point Upper Anchorage Strap
  • 3PTR Removeable 3rd Point Upper Anchorage Strap

 

Extension Straps

Extends the Double Inertia webbing where needed

  • Product codes:
  • ES300 (300mm extension strap)
  • ES500 (500mm extension strap)

 

 

 

 

 

 

 

 

 

 

 

Saturday, 14 July 2012 14:32

3 Point Harness

Written by

3-Point Harness

This Passenger restraint forms a separate
static lap belt and shoulder belt.
Produced with red webbing for shoulder belts
and black webbing for lap belts, enabling the
driver and carer to quickly ascertain whether
their passengers are safely secured for transport.
The 3 Point Static Lapbelt and Diagonal is
normally chosen for wheelchair occupants with good
upper body control.

 

  • 3 Point Static Lapbelt with Static Diagonal
  • product code: OCR02

 

 

 

 

 

 

 

 

  • 3 Point Static Lapbelt with Retractable Diagonal
  • product code: OCR03
Saturday, 14 July 2012 14:16

Best Vest

Written by

Best Vest

 

Bestvest is a vehicle positioning device designed to
secure the seatbelt on the shoulder at all times.
Bestvest is a revolutionary vest that can secure
seatbelts on the shoulder permanently helping to
maintain a comfortable and safe position for passengers.

  • Bestvest sizes available form 5 yrs to adult
  • Bestvest is a positioning device,
  • a seatbelt is also required to restrain the occupant.
  • Bestvest is suitable for wheelchair based passengers
  • and can also be worn in conjunction with a booster seat.
Product Codes:
  • BS - Adult Bestvest Small
  • BM - Adult Bestvest Medium
  • BL - Adult Bestvest Large
  • BXL - Adult Bestvest XLarge
  • B126 - Child Bestvest 116-128cm
  • B140 - Child Bestvest 128-140cm
  • B152 - Child Bestvest 140-152cm
  • B164 - Child Bestvest 152-164cm
 
 
 
 
 
 
 
 
 
 
 
 
Best Vest Sizes

 

 

 

Saturday, 14 July 2012 09:11

Headrest

Written by

Headrest

 

The headrest is designed to provide head support
for wheelchair users. If used during transport, a headrest
can considerably reduce the risk of whiplash in case of an
accident. Easily mounted on the wheelchair handles
(maximum diameter 25mm).
It is fully adjustable for height, width and angle. 
The headrest is covered with washable PVC,
and comes in three different stalk lengths,
Standard Adult, Tall Adult and Children.

  • Product Codes:
  • HRC - Child Headrest
  • HRS - Standard headrest
  • HRL - Long Headrest

 

Wednesday, 11 July 2012 16:22

Seat Locking

Written by

Seat Positioning

Seating systems can greatly improve a vehicle
layout by offering flexible seat configuration.
When using Unwin seating systems in conjunction
with our floor rail, a vehicle layout can be easily
changed from fully seated to wheelchair accessible
within minutes.

 

Unwin work closely with all approved seat
manufacturersto provide trusted solutions
for a variety of vehicle types.

 

Our range will offer you the choice of removable
seat fixtures, semi-permanent track bolt fixings.

 

Standard Seat Fixtures - M1

Tested to M1 on single seats and M2 on double seats.

  • Secure and very easy to operate
  • Locate directly into the floor rails
  • Plunger mechanism with anti rattle device
  • Transport wheels are available as an option
  • Product code: SL

 

 

 

 

 

 

 

HAL Seat Fixtures - M1

HAL (Hand Actuated Lockable) is a new removable
seat fixtur
e especially suited to the Community Transport market.

Tested to M1 on seats and M2 on double seats.

  • Single Hand Operation
  • Easy to grip and operate handle
  • Single release hand trigger with anti-tamper
  • Rattle free and very secure
  • Integrated positioning wheel
  • Transport wheels are available as an option
  • Product code: HAL2 (with 2 fixing studs)
  • Product code: HAL3 (with 3 fixing studs)
 

 

 

 

 

 

 

 

Transport Wheels

A pair of Transport Wheels to be used with our seat Fixtures enables a transport operator to
move a seat in and out of their vehicle without effort. 
Sold as a pair the transport wheel can be used with either HAL or our standard seat lockable's.

  • Product code: TW

 

 

 

 

 

 

 

T-Bolt Range

Designed to be compatible with all approved seat manufacturers, T-Bolts are an easy
method of securing seats within a vehicle. 
T-Bolts are a non-removable fixing for permanent seat positions
or, can be re-positioned by loosening the nuts and sliding along the rail. 
If T-Bolts are repositioned the Ny-Loc nuts must be replaced.

  • Product code: TN (25mm M2 single seat use only)
  • Product code: TNL (40mm M2 single seat use only)
  • Product code: TN1 (25mm M1 T-Bolt 25.4mm pitch)
  • Product code: TN2 (25mm M1 T-Bolt 50.8mm pitch)
  • Product code: TN3 (25mm M1 T-Bolt 76.2mm pitch)
  • Product code: TNL1 (40mm M1 T-Bolt 25.4mm pitch)
  • Product code: TNL2 (40mm M1 T-Bolt 50.8mm pitch)
  • Product code: TNL3 (40mm M1 T-Bolt 76.2mm pitch)
Wednesday, 23 November 2011 22:36

Solo Anchor

Written by

Solo Anchor

Solo floor anchors are bolted permanently to the
vehicle floor for dedicated wheelchair positions,
allowing all Solo restraints to be easily fitted
or removed when required.

The system consists of a patented floor anchor and a fixing cleat.
The system encompasses spring loaded or static floor anchors, which are permanently fixed
to the vehicle floor.  The Solo fitting on the restraint's strap slides on to the anchor point 
in order to secure the wheelchair.  The system is quick, easy to use and very effective.  
The floor anchor assembly is made of stainless steel.

Product codes:

  • SA - Standard Fllor Anchor
  • Spring Loaded with threaded length: 50mm.
  • SAS - Short Floor Anchor
  • Spring Loaded with threaded length: 30mm.
  • SAL - Long Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • HVSA - High-Vis Floor Anchor
  • Spring Loaded with threaded length: 50mm.
  • HVLSA - High-Vis Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • S10 - Static Floor Anchor
  • comes with 10mm bolt fixing.

 

Wednesday, 23 November 2011 22:29

Innotrax Flooring

Written by

Innotrax is a new generation of flooring system that 'clicks' together to form a perfect vehicle floor base.
Innotrax is a fully tested system to M1 standard across a wide range of vehicles, from 11 major vehicle manufacturers.
Fully compatible with all Unwin products, Innotrax is available in various panel lengths to create the ultimate flooring design, and can be especially tailored to suit individual vehicle requirements.

Innotrax flooring system offers automatic approval on a range of vehicles, eliminating the need for single vehicle testing, thus significantly reducing the cost to individual body builders and creating the widest possible choice for the specifier.

 

 

 

 

 

 

 

  • Made up from lightweight aluminium extrusions to produce a flat uniform floor with a parallel rail fitting.
  • There are 4 standard design options that can be adapted to most vehicles.
  • Purpose-built floor designs are available upon request.
  • The floor is fully secured to the vehicle with an approved structural adhesive thereby retaining the full integrity of the original manufacturers specification.
  • Innotrax flooring is compliant with:
  • E.U. Directive 76 / 115 / EEC
  • for categories M1, M2 and M3

 

Plain Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P2 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

Rail Planks, available in two width profiles and five length options

R1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

R2 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

INNOTRAX FLAT FLOOR


In standard vehicle conversions, rear wheel arch intrusion limits the internal floor space and reduces the number of wheelchair and non-wheelchair occupants that can be transported. With the Innotrax Flat Floor system, this problem is eliminated creating the potential to maximise the internal space of the vehicle.


 
Wednesday, 23 November 2011 22:25

Flooring Rails

Written by

Surface Rail

 



Surface Rail is available for floor mounting in vehicles where
a conversion using a flush fitted rail is not possible.

Product code:   SRD36
Surface rail drilled M8, length 3.68m



Lo-Profile Rail



Low Profile Rail has been tried and tested over many years.
Its ease of installation and inherent strength makes it the
first choice for many specifiers and vehicle converters.

Product code:   LPRD36
Lo-Profile rail drilled M8, length 3.68m


Heavy Duty Rail

 



Specially designed to meet the changing needs of the market,
Heavy Duty Rail considerably increases the structural integrity
of the vehicle floor strength.
Available in 2 rail lengths of 3.95m and 4.5m.

Product code:   HDRF39 (3.95m)
Product code:   HDRF45 (4.50m)


Rail End Caps

End Caps provide an attractive finish to mounted and protect the floor during washing.

Product code:   LPEC                            Product code: SEC
Metal End cap for Lo-Profile rail                 Metal End Cap for Surface Rail

Product code:   RECLY                         Product code: RECLG
Yellow Plastic End cap for Lo-Pro Rail        Grey Plastic End Cap for Surface Rail

Product code:   RECSY                         Product code: RECSG
Yellow Plastic End cap for Surface Rail       Grey Plastic End Cap for Lo-Pro Rail

 

Rail Fixing


M8 fasteners are recommended when fitting 
Unwin Low Profile and Surface Rail systems
and are mandatory on floor installations 
meeting M1 loads.

 

 

 

 

 

 

 

Product code:   RF10 ( kit of 10)

Product code:   RF100 ( kit of 100)

Product code:   USP (underfloor spreader plate)

Rail fixings are Grade 10.9 plated, with nyloc nut and washer

Underfloor spreader plates are used with rail fasteners in place of washers.


Rail Trim

Rubber strips keep the rail track clean from dirt.
Easily slides into the rail central channel.
Easily cut to any size to suit. 
Available in 4m and 25m length.

Product code:   RT04 Product code:   RT25
Rubber rail insert 4m roll                      Rubber rail insert 25m roll

 

Innotrax Rail Products

 

 

 

 

 

 

 

Plain Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

Rail Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

Solo Anchors

Solo floor anchors are bolted permanently to the vehicle floor
for dedicated wheelchair positions, allowing all Solo
restraints to be easily fitted or removed when required

 

 

 

 

 

 

 

Product codes:

  • SA          -   Standard Floor Anchor
  • Spring Loaded with threaded length: 50mm.
  • SAS        -   Short Floor Anchor
  • Spring Loaded with threaded length: 30mm.
  • SAL        -   Long Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • HVSA     -   High-Vis Floor Anchor
  • Spring Loaded with threaded length: 50mm.
  • HVLSA   -   High-Vis Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • S10       -   Static Floor Anchor
  • comes with 10mm bolt fixing.

 

 

×

Warning

JUser: :_load: Unable to load user with ID: 63
JUser: :_load: Unable to load user with ID: 62

Our Location

 

Pro Mobility Ltd.

Unit A3, 
Airside Enterprise Centre, 
Airside Business Park,
Swords, 
Co. Dublin, 
Ireland

Get in Touch

 

Tel: +353 1 8900890   
Fax: +353 1 8901448

sales@promobility.ie

www.promobility.ie

Promobility

Promobility Ltd. was incorporated in 2001 to serve the needs of people with a disability. Our goal is a simple one; to provide the best service combined with the best quality products to our customers.