Tuesday, 06 December 2011 23:03

Innotrax Flooring

Innotrax is a new generation of flooring system that 'clicks' together to form a perfect vehicle floor base.
Innotrax is a fully tested system to M1 standard across a wide range of vehicles, from 11 major vehicle manufacturers.
Fully compatible with all Unwin products, Innotrax is available in various panel lengths to create the ultimate flooring design, and can be especially tailored to suit individual vehicle requirements.

Innotrax flooring system offers automatic approval on a range of vehicles, eliminating the need for single vehicle testing, thus significantly reducing the cost to individual body builders and creating the widest possible choice for the specifier.

Innotrax is a patented product produced under license from Martech Holding A/S.

 

 

 

 

 

 

 

  • Made up from lightweight aluminium extrusions to produce a flat uniform floor with a parallel rail fitting.
  • There are 4 standard design options that can be adapted to most vehicles.
  • Purpose-built floor designs are available upon request.
  • The floor is fully secured to the vehicle with an approved structural adhesive thereby retaining the full integrity of the original manufacturers specification.
  • Innotrax flooring is compliant with:
  • E.U. Directive 76 / 115 / EEC
  • for categories M1, M2 and M3

 

Plain Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P2 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

Rail Planks, available in two width profiles and five length options

R1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

R2 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

INNOTRAX FLAT FLOOR


In standard vehicle conversions, rear wheel arch intrusion limits the internal floor space and reduces the number of wheelchair and non-wheelchair occupants that can be transported. With the Innotrax Flat Floor system, this problem is eliminated creating the potential to maximise the internal space of the vehicle.


 

Wednesday, 23 November 2011 22:36

Solo Anchor

Solo Anchor

Solo floor anchors are bolted permanently to the
vehicle floor for dedicated wheelchair positions,
allowing all Solo restraints to be easily fitted
or removed when required.

The system consists of a patented floor anchor and a fixing cleat.
The system encompasses spring loaded or static floor anchors, which are permanently fixed
to the vehicle floor.  The Solo fitting on the restraint's strap slides on to the anchor point 
in order to secure the wheelchair.  The system is quick, easy to use and very effective.  
The floor anchor assembly is made of stainless steel.

Product codes:

  • SA - Standard Fllor Anchor
  • Spring Loaded with threaded length: 50mm.
  • SAS - Short Floor Anchor
  • Spring Loaded with threaded length: 30mm.
  • SAL - Long Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • HVSA - High-Vis Floor Anchor
  • Spring Loaded with threaded length: 50mm.
  • HVLSA - High-Vis Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • S10 - Static Floor Anchor
  • comes with 10mm bolt fixing.

 

Wednesday, 23 November 2011 22:29

Innotrax Flooring

Innotrax is a new generation of flooring system that 'clicks' together to form a perfect vehicle floor base.
Innotrax is a fully tested system to M1 standard across a wide range of vehicles, from 11 major vehicle manufacturers.
Fully compatible with all Unwin products, Innotrax is available in various panel lengths to create the ultimate flooring design, and can be especially tailored to suit individual vehicle requirements.

Innotrax flooring system offers automatic approval on a range of vehicles, eliminating the need for single vehicle testing, thus significantly reducing the cost to individual body builders and creating the widest possible choice for the specifier.

 

 

 

 

 

 

 

  • Made up from lightweight aluminium extrusions to produce a flat uniform floor with a parallel rail fitting.
  • There are 4 standard design options that can be adapted to most vehicles.
  • Purpose-built floor designs are available upon request.
  • The floor is fully secured to the vehicle with an approved structural adhesive thereby retaining the full integrity of the original manufacturers specification.
  • Innotrax flooring is compliant with:
  • E.U. Directive 76 / 115 / EEC
  • for categories M1, M2 and M3

 

Plain Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P2 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

Rail Planks, available in two width profiles and five length options

R1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

R2 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

INNOTRAX FLAT FLOOR


In standard vehicle conversions, rear wheel arch intrusion limits the internal floor space and reduces the number of wheelchair and non-wheelchair occupants that can be transported. With the Innotrax Flat Floor system, this problem is eliminated creating the potential to maximise the internal space of the vehicle.


 
Wednesday, 23 November 2011 22:25

Flooring Rails

Surface Rail

 



Surface Rail is available for floor mounting in vehicles where
a conversion using a flush fitted rail is not possible.

Product code:   SRD36
Surface rail drilled M8, length 3.68m



Lo-Profile Rail



Low Profile Rail has been tried and tested over many years.
Its ease of installation and inherent strength makes it the
first choice for many specifiers and vehicle converters.

Product code:   LPRD36
Lo-Profile rail drilled M8, length 3.68m


Heavy Duty Rail

 



Specially designed to meet the changing needs of the market,
Heavy Duty Rail considerably increases the structural integrity
of the vehicle floor strength.
Available in 2 rail lengths of 3.95m and 4.5m.

Product code:   HDRF39 (3.95m)
Product code:   HDRF45 (4.50m)


Rail End Caps

End Caps provide an attractive finish to mounted and protect the floor during washing.

Product code:   LPEC                            Product code: SEC
Metal End cap for Lo-Profile rail                 Metal End Cap for Surface Rail

Product code:   RECLY                         Product code: RECLG
Yellow Plastic End cap for Lo-Pro Rail        Grey Plastic End Cap for Surface Rail

Product code:   RECSY                         Product code: RECSG
Yellow Plastic End cap for Surface Rail       Grey Plastic End Cap for Lo-Pro Rail

 

Rail Fixing


M8 fasteners are recommended when fitting 
Unwin Low Profile and Surface Rail systems
and are mandatory on floor installations 
meeting M1 loads.

 

 

 

 

 

 

 

Product code:   RF10 ( kit of 10)

Product code:   RF100 ( kit of 100)

Product code:   USP (underfloor spreader plate)

Rail fixings are Grade 10.9 plated, with nyloc nut and washer

Underfloor spreader plates are used with rail fasteners in place of washers.


Rail Trim

Rubber strips keep the rail track clean from dirt.
Easily slides into the rail central channel.
Easily cut to any size to suit. 
Available in 4m and 25m length.

Product code:   RT04 Product code:   RT25
Rubber rail insert 4m roll                      Rubber rail insert 25m roll

 

Innotrax Rail Products

 

 

 

 

 

 

 

Plain Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

Rail Planks, available in two width profiles and five length options

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

P1 2850mm, 3170mm, 3680mm, 4500mm, 4700mm

 

Solo Anchors

Solo floor anchors are bolted permanently to the vehicle floor
for dedicated wheelchair positions, allowing all Solo
restraints to be easily fitted or removed when required

 

 

 

 

 

 

 

Product codes:

  • SA          -   Standard Floor Anchor
  • Spring Loaded with threaded length: 50mm.
  • SAS        -   Short Floor Anchor
  • Spring Loaded with threaded length: 30mm.
  • SAL        -   Long Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • HVSA     -   High-Vis Floor Anchor
  • Spring Loaded with threaded length: 50mm.
  • HVLSA   -   High-Vis Floor Anchor
  • Spring Loaded with threaded length: 90mm.
  • S10       -   Static Floor Anchor
  • comes with 10mm bolt fixing.

 

 

Thursday, 17 November 2011 21:46

Space Genie Folding Tricycle

The Space Genie folding trike has been designed similar to the Trilogy tricycle except with a lower step over frame. It has a folding mechanism in the middle of the frame allowing it to fold in half so that it can be easily transported in the boot of a car.
A quick release system allows the handle bars to be removed quickly for storage in the basket. The tyres have a reflective side wall for safety.

Folded diamensions:

20 “ wheel    L 1010mm x W 760mm x H 790mm

24” wheel     L 1160mm x W 760mm x H 840mm.

price €835.00 (assembled)

Thursday, 17 November 2011 21:43

Di Blasi Folding Tricycle

For more than thirty years Di Blasi have been producing folding scooters, folding bicycles and folding tricycles that are used as back-up vehicles on boats, in campers, in airplanes, in cars as well as for a general free time vehicle.
DI BLASI's folding tricycles offer a level of convenience and useability impossible with non-folding machines. Not only does the ability to fold make storage more practical, but it also means that Di Blasi tricycles have significantly increased versatility. The small folded size makes transportation in a car very easy.
The folding operation takes just five seconds and three steps without the need to use tools, or the need to screw or unscrew any parts. Unfolding for use can be done in the same time with even less effort.
They are small engineering masterpieces. The frame (patented) includes a three-dimensional automatic folding mechanism.
Technical solutions have always been at the forefront and all with the goal to make folding quick and easy, to reduce the dimension of the folded vehicles to a minimum, and to reduce the weight while maintaining strength and safety.

Price €2000.00

Thursday, 17 November 2011 21:39

Trilogy 20-24

Our 20”and 24” wheel Trike, is ideal for the young and old.  
Trilogy can also be adapted  for handicapped persons and special needs, and is suitable for people who have had a stroke, or have balance problems, or just don’t have the confidence to ride a conventional two wheeled cycle.

The 20” wheel Trilogy is recommend for riders up to 5.4ft tall. “Approx” guide lines.
Min inside leg measurement with pedal at lowest position 26". Highest 34"

The 24” wheel Trilogy is recommend for users over 5.4 inch and taller and up to 16 stone in weight. Minimum inside leg from saddle to pedal not the floor as feet do not need to touch the ground, 28 inches.

Features:

  • Tubular steel frame
  • Adjustable handlebar stem for extra adjustment.
  • Available in either 20” or 24 “ Alloy wheel size.
  • 6 speed Gears.
  • Front V Brake. Rear Drum Brake. • Additional parking brake for safety.
  • Comfortable coil sprung padded saddle.
  • Dimensions: Rear axle width 30”. Overall length 56". Step over height 16”.
  • Weight 32 Kilo.
  • Large rear shopping basket.
  • Full length mudguards.
  • Fully sealed rear axles.
  • Optional extras. Back rests, self leveling pedals & a waterproof cover. Also a single brake lever that operates both brakes.
  • Price €760.00 (assembled)

 

Thursday, 17 November 2011 21:35

Solo (low-step over)

This is the new  Solo. The frame has been specially designed with a low step over of only 6 inches from the ground making it easy to mount and dismount. Proven to be very popular with the elderly and physically challenged. Giving a new lease of life by feeling safe on three wheels. Helping to raise the independence of disabled people and achieve a greater sense of self-worth.

The solo is ideal for those little shopping trips with a large basket on the rear to carry groceries. They are also used as delivery vehicles.

Features:

  • Low step-over frame height of 6”
  • Equipped with 20” alloy wheels.
  • Front V-brake rear drum brake.
  • Full set of mudguards,
  • 6 speed Shimano gears.
  • Adjustable handlebar stem.
  • Both brake levers are equipped with a parking brake.
  • A comfortable padded sprung saddle.
  • The width across the rear axle is 30 Inches (76cm).
  • Overall length 73 inches (185cm).
  • Price €865.00 (assembled)

 

Wednesday, 16 November 2011 23:24

Triology 16

Our 16” wheel Trilogy Trike is probably the most popular in the range. Suitable for children approx 6 years upwards depending on the inside leg measurement. Min 22 inches to Max 27” This can be adjusted to grow with the child. A shorter crank can be fitted to reduce inside leg to 19 inches.
It Comes with a freewheel as standard allowing your child to be able to coast without the pedals going around. It is possible too change to a fixed wheel so that the Trike can be pedaled forward and reverse. Can be useful for children with lack of power in their legs as the forward motion helps keep their feet going around. Both brake levers come equipped with a parking brake. Front and rear basket.
We fit a very large tractor type saddle to this model making your child feel more secure. Helping to raise the independence of disabled people and achieve a greater sense of self-worth. Giving a new lease of life by feeling safe on three wheels. The enjoyment of cycling in the garden, in parks and on cycling paths.
An optional removable Parent handle is available to fit to all of our trikes allowing your child to sit back and relax while you guide them.

  • Suited to children from approx. 6 years upward
  • Inside leg measurement – min. 22” to max. 27”
  • Price €645.00 (assembled)

Buy online at: http://www.busybuddys.ie/tricycles/triology-16/

 

Wednesday, 16 November 2011 23:21

MX 20

Designed to give that cool factor.  This model brings the traditional trike into the 21st century.
Giving children a tricycle that looks as good as modern day bicycles.  Helping raise independance and achieve a greater sense of worth.
Comes equipped with alloy BMX wheels and knobbly tyres ideal for rough terrain.
Front suspension forks, BMX freestyle handlebars, powerful V brakes and coil sprung saddle are some of the features on this trike.
it also has a small luggage tray for carrying light loads.

  • Comes with 6 speed Simano gears.

 

  • 20 inch wheel version suitable for teenagers to adult.
  • Min inside leg 24 inches to a max of 31 inches (62-80cms).
  • Dimensions: Width 24"(610mm), Length 58"(1475mm), Height 37"(940mm), Weight 24kg.
  • Price €785.00 (assembled)

Buy online at: http://www.busybuddys.ie/tricycles/mx-20/

 

 

 

Page 1 of 3
×

Warning

JUser: :_load: Unable to load user with ID: 62

Our Location

 

Pro Mobility Ltd.

Unit A3, 
Airside Enterprise Centre, 
Airside Business Park,
Swords, 
Co. Dublin, 
Ireland

Get in Touch

 

Tel: +353 1 8900890   
Fax: +353 1 8901448

sales@promobility.ie

www.promobility.ie

Promobility

Promobility Ltd. was incorporated in 2001 to serve the needs of people with a disability. Our goal is a simple one; to provide the best service combined with the best quality products to our customers.